rally
07-13 09:51 AM
If you invest more than 1 million(like bechams hollywood hills home) in US you are eligible to apply for a greencard
wallpaper Drive: 2004 Infiniti QX56
Madan Ahluwalia
02-23 04:26 PM
Your wife will provide affidavit of support too. But if income is not enough, you can get someone else to be joint sponsor.
amohale
03-12 07:52 PM
Anyone, please respond to my questions below.......... it will be a great help......
2011 2010 Infiniti QX56
bingl
04-16 11:02 AM
thanks weaseley ....
We are in Kansas....I did show the 485 receipt ....they said 'its just a receipt' not an approval....and so they can't use that. I'll try calling USCIS for the letter. I hope it works since I don't want to waste money on an EAD which I am not gonna use.
We are in Kansas....I did show the 485 receipt ....they said 'its just a receipt' not an approval....and so they can't use that. I'll try calling USCIS for the letter. I hope it works since I don't want to waste money on an EAD which I am not gonna use.
more...
greencardvow
07-20 08:22 PM
Does anyone know what happens when the original hard copy of PERM is lost. Can one file 140 with just the copy that you can get online from DOL site
hsm2007
09-21 07:42 AM
Does it matter if it is Junior attorney or senior attorney in Murthy firm. I am not getting any appointments with senior until Friday.
First thing you need to do is setup a 30 min - 1 hour appointment with an experienced Attorney (Khanna/ Murthy/ Ron) You can have a telephonic discussion. Do not think about money and go for the best.
During discussion bring up the topic of new employment (C) as well .
If you have the format from your current company attorney , show it to them .
It might be simpler then you are thinking.
First thing you need to do is setup a 30 min - 1 hour appointment with an experienced Attorney (Khanna/ Murthy/ Ron) You can have a telephonic discussion. Do not think about money and go for the best.
During discussion bring up the topic of new employment (C) as well .
If you have the format from your current company attorney , show it to them .
It might be simpler then you are thinking.
more...
BrickWall
03-12 09:49 PM
You cannot become a Canadian Citizen, just because you are on H1 in the US. The only advantage is you can apply for Permanent Residency from the US, which is much faster than applying from India. Once, you get your Green Card, you still should maintain residency in Canda, before you apply for Citizenship.
Ria, You can apply for Canadian Permanent Residency by urself. You dont need to hire people to do it. I did it by myself, and it is very easy.
Hi..
I am working in US from last 4yrs and applying for canadian immig. What if I have applied it through NYC Buffalo but by the time they are finished processing (lets say 2 hrs from now), I had to move to India (coz i din't get my GC from here or any other reason). Can I go to consulate in India or do I have to come here for interview? how would that work?
Thank you in advance..
Ria, You can apply for Canadian Permanent Residency by urself. You dont need to hire people to do it. I did it by myself, and it is very easy.
Hi..
I am working in US from last 4yrs and applying for canadian immig. What if I have applied it through NYC Buffalo but by the time they are finished processing (lets say 2 hrs from now), I had to move to India (coz i din't get my GC from here or any other reason). Can I go to consulate in India or do I have to come here for interview? how would that work?
Thank you in advance..
2010 2011 Infiniti QX56 Feature
dbevis
April 16th, 2004, 06:29 PM
Hmm, anyone know how to Photoshop some people into a bubble? :)
Whom did you have in mind? :)
A little deform tool work to approximate the curvature, then blend that and the original image together. PSP has a "geometric effects" tool called "spherize" that would take care of the first part.
Whom did you have in mind? :)
A little deform tool work to approximate the curvature, then blend that and the original image together. PSP has a "geometric effects" tool called "spherize" that would take care of the first part.
more...
puskeygadha
07-17 09:11 AM
has there been any update from fragemon
hair and 2010) Infiniti QX56
satyakb
03-21 09:32 PM
We would like to Thank every onefor providing detailed advices - considering various aspects of life.
Will surely update the thread when we make a final decision.
Will surely update the thread when we make a final decision.
more...
Bimmer740i
07-10 07:39 PM
http://www.ilbsg.com
They charge $600 for H-1B
They charge $600 for H-1B
hot 2011 Infiniti QX56 Base Sport
rangaswamy
10-25 04:30 PM
Mine still says pending even though i received it 2 weeks ago....
but my spouses status was spot on through the process..
but my spouses status was spot on through the process..
more...
house 2011 Infiniti QX56
snathan
02-19 05:01 PM
hi,
Congrats on your marriage. If you are a U.S. Citizen and Husband entered the U.S. in a legal fashion (with a visa or any other LEGAL way) and can prove this, and if he has never been deported, or deported in absentia and has never committed a crime that would cause him inadmissible to the U.S, then you, the petitioner would file form I-130 for husband and at the same time he would file form I-485 to adjust status to a U.S. Permanent Resident. Both petitions would go together in one envelope to one location. Alternatively, you can file form I-130, wait for its approval, and once approved, your husband would need to file form I-485 to adjust status. I hope this clarifies a little bit? Good Luck.
Once again, if your husband has no criminal history and he entered U.S. legally, this is a straightforward case, assuming you can show the necessary income. Both form instructions explain how to do it and how to submit the applications.
Unfortunately her husband is an undocumented alien. He is not in legal status. So the case is not straight forward one.
Congrats on your marriage. If you are a U.S. Citizen and Husband entered the U.S. in a legal fashion (with a visa or any other LEGAL way) and can prove this, and if he has never been deported, or deported in absentia and has never committed a crime that would cause him inadmissible to the U.S, then you, the petitioner would file form I-130 for husband and at the same time he would file form I-485 to adjust status to a U.S. Permanent Resident. Both petitions would go together in one envelope to one location. Alternatively, you can file form I-130, wait for its approval, and once approved, your husband would need to file form I-485 to adjust status. I hope this clarifies a little bit? Good Luck.
Once again, if your husband has no criminal history and he entered U.S. legally, this is a straightforward case, assuming you can show the necessary income. Both form instructions explain how to do it and how to submit the applications.
Unfortunately her husband is an undocumented alien. He is not in legal status. So the case is not straight forward one.
tattoo The Infiniti QX56 is a
dixie
08-21 09:58 PM
The situation is unfair only if there is no retrogression. In that case there is a high probability that the one who applied in 2005 gets his GC (or at least EAD/AP), while a 2001 applicant's LC is still caught in the BEC.
But given that retrogression is very much in place for all but EB-1 and EB-2 ROW, an approved I-140 is pretty much useless except for getting 3 year extensions (and limited portability) . In that case, even if the 2005 applicant gets his I-140 approval in a jiffy, he has to wait behind the BEC victim when it comes to applying for 485 (assuming of course that BECs dont last forever).So retrogression neutralises the unfairness of BECs to a large extent.
I do agree however, that the BECs should have been cleared prior to starting the PERM system.
All the fresh H1's wait little longer, while older h1 case gets adjucated. Presently, a guy who filed in 1999, 2000, 2001 is clue less, on what is happening, a guy who filed in 2005/6 had a 140 already, is this fair ?
So to make it more evenly distributed, delay the process by 2/3 years for every new h1 applicant, and also insisting on 2 years of tax filing , will ensure, the older applications gets processed in the meanwhile, and also help the newer applications get streamlined.
Hope u got the point...
But given that retrogression is very much in place for all but EB-1 and EB-2 ROW, an approved I-140 is pretty much useless except for getting 3 year extensions (and limited portability) . In that case, even if the 2005 applicant gets his I-140 approval in a jiffy, he has to wait behind the BEC victim when it comes to applying for 485 (assuming of course that BECs dont last forever).So retrogression neutralises the unfairness of BECs to a large extent.
I do agree however, that the BECs should have been cleared prior to starting the PERM system.
All the fresh H1's wait little longer, while older h1 case gets adjucated. Presently, a guy who filed in 1999, 2000, 2001 is clue less, on what is happening, a guy who filed in 2005/6 had a 140 already, is this fair ?
So to make it more evenly distributed, delay the process by 2/3 years for every new h1 applicant, and also insisting on 2 years of tax filing , will ensure, the older applications gets processed in the meanwhile, and also help the newer applications get streamlined.
Hope u got the point...
more...
pictures 2009 Infiniti QX56 – Hi-res.
sjhugoose
February 15th, 2004, 05:54 PM
I have a Sony DSC F717. I got it to photograph model trains, so it is almost lways in macro mode. Frequently, the image blurs toawrds the back, even when set at the highest F-stop. The subject is usially about 5-12 inches away from the camera, depending on the model I am photographing. The models are about an inch high and up to 10 inches long.
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
Your experiencing an effect called Depth of Field(DOF). This is commen and usally you want to minimize it for effect but not in your case.
You will need to learn to use a DOF calculator, there is one on this site but it does not include the 2/3" sensor sive you camera has. A better one for you right now may be this calculator here: http://www.dpreview.com/reviews/nikoncp5700/page2.asp
Using this you can determine the distance you need, focal length and distance to subject to obtain the desired DOF. Currently on the wide end of your camera, you'll need to move about a 1.5 feet from the focus point with f8 to get the DOF you desire. If you get the WA adaptor you'll be able to move closer to about .9 feet from the focus point and still obtain the DOF you desire.
You'll never be able to be within 5 inches from the object and obtain the DOF you desire, it simply is not possible with you camera. As to which WA adaptor to get? I don't know. I've never used anything of the sort so I can not answer that question for you.
Scott
I suspect a wide angle lense should help this, but sony has two available for their 58MM bezel. Am i right on this? Basically i want close up on full manual with
as good a depth of fied as possible. Here are the choises:
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLMHG07A
This one costs $150, includes two peice glass.
http://www.sonystyle.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/SY_DisplayProductInformation-Start;sid=C5ukSQtNKAGkcEti_UiuQkRd1gcWOHL-Dh0=?CategoryName=dcc_DIAccessories_DILensesandFil ters_Lenses&Dept=dcc&TemplateName=item%2fsy_item_b&ProductSKU=VCLHG0758
This one is $400, and is a three peice glass.
Both have the same .7x magnification. Wich one should I get?
Your experiencing an effect called Depth of Field(DOF). This is commen and usally you want to minimize it for effect but not in your case.
You will need to learn to use a DOF calculator, there is one on this site but it does not include the 2/3" sensor sive you camera has. A better one for you right now may be this calculator here: http://www.dpreview.com/reviews/nikoncp5700/page2.asp
Using this you can determine the distance you need, focal length and distance to subject to obtain the desired DOF. Currently on the wide end of your camera, you'll need to move about a 1.5 feet from the focus point with f8 to get the DOF you desire. If you get the WA adaptor you'll be able to move closer to about .9 feet from the focus point and still obtain the DOF you desire.
You'll never be able to be within 5 inches from the object and obtain the DOF you desire, it simply is not possible with you camera. As to which WA adaptor to get? I don't know. I've never used anything of the sort so I can not answer that question for you.
Scott
dresses Infiniti QX56 Review
qualified_trash
11-15 09:08 AM
I head that Backlog centers is allowing people to convert their applications from TR to RIR. Can I know whats the process. I can ask my lawyer to do that
I am sorry but you seem to be confused. Your post says that the RIR provision in your app was rejected and your labor app has been put in the TR queue (traditional recruitment). now you are asking if you can convert to RIR again??
how will they let you convert when they specifically rejected the RIR?? I suggest you speak with a lawyer, and, understand this process completely before taking any further steps.
I am sorry but you seem to be confused. Your post says that the RIR provision in your app was rejected and your labor app has been put in the TR queue (traditional recruitment). now you are asking if you can convert to RIR again??
how will they let you convert when they specifically rejected the RIR?? I suggest you speak with a lawyer, and, understand this process completely before taking any further steps.
more...
makeup 2004 Infiniti QX56
small2006
07-21 10:21 AM
FYI:
I don't know if this is old news but thought of sharing it anyway.
I was in the same boat as many others here i.e, no FP notice even 1yr after filing for 485. With my PD becoming current in Aug 2008, I called my attorney to see if he can do anything to help me out. He told me that due to several complaints from people like us and a law suit threat (or an actual lawsuit, not sure) from AILA, the Texas center has sent has set up an exclusive fax line for such requests. This system came into existence only about 2-3 weeks ago.
He sent a fax on my behalf to that number last Tuesday 7/15/08. My wife and I both received FP notices on Sat 7/19/08! So looks like for a change, something that’s set up for our own good is actually working. Frankly, I hadn’t pinned any hopes on the fax having a positive impact but I was pleasantly surprised. Our appointments are for next week.
Hope this little tip will help others in the same boat if their attorneys are either not aware and/or haven’t told their clients about it.
The fax number is not made available to the general public. Only attorneys have access to it.
BTW: As a result of all this, I haven't seen any LUD changes (soft or hard) on my case status online....I thought that was strange.
I don't know if this is old news but thought of sharing it anyway.
I was in the same boat as many others here i.e, no FP notice even 1yr after filing for 485. With my PD becoming current in Aug 2008, I called my attorney to see if he can do anything to help me out. He told me that due to several complaints from people like us and a law suit threat (or an actual lawsuit, not sure) from AILA, the Texas center has sent has set up an exclusive fax line for such requests. This system came into existence only about 2-3 weeks ago.
He sent a fax on my behalf to that number last Tuesday 7/15/08. My wife and I both received FP notices on Sat 7/19/08! So looks like for a change, something that’s set up for our own good is actually working. Frankly, I hadn’t pinned any hopes on the fax having a positive impact but I was pleasantly surprised. Our appointments are for next week.
Hope this little tip will help others in the same boat if their attorneys are either not aware and/or haven’t told their clients about it.
The fax number is not made available to the general public. Only attorneys have access to it.
BTW: As a result of all this, I haven't seen any LUD changes (soft or hard) on my case status online....I thought that was strange.
girlfriend Pictures of 2005 INFINITI QX56
hemya
12-10 12:59 PM
Thanks
hairstyles 2009 Infiniti Qx56 Passenger
krassib
09-21 04:06 PM
My lawyer and I both tried using this link but we keep getting error messages.
Has anyone got any updates on their cases on this link?
Yes, I told my lawyers next day after the site was opened and they confirmed that my case is in the system and "In Process," although, �In Process� is a very broad term � it does not tell me where in the queue my case is, when it will start to be worked on, i.e. the time factor and estimations are missing. It is really bad, bad system ;-(
Has anyone got any updates on their cases on this link?
Yes, I told my lawyers next day after the site was opened and they confirmed that my case is in the system and "In Process," although, �In Process� is a very broad term � it does not tell me where in the queue my case is, when it will start to be worked on, i.e. the time factor and estimations are missing. It is really bad, bad system ;-(
anishNewbie
09-10 06:07 PM
MS+0--hard to sell to DOL, particularly in current economic condition, as unemployment rates are in double digits. It is also depends on the location of the job. DOL may belive that they can't find US citizen with MS+0, for the job in Alaska. !00% they wont belive if the job is in michigan or california, where the unemployment rate is very high.
Wow.. this is worrying factor...:( :confused: :(
I hope there would be some1 here in this forum who would have passed the Labor, I-40 or GC test with just MS+0 experience with EB2 category...
Wow.. this is worrying factor...:( :confused: :(
I hope there would be some1 here in this forum who would have passed the Labor, I-40 or GC test with just MS+0 experience with EB2 category...
arunmohan
04-06 12:44 PM
Friends ,
Count me in,I live in Tucson.
Count me in,I live in Tucson.
No comments:
Post a Comment